Gas Hydrates and Flow Assurance of Reservoir Fluids

Select Other "city & date"
Gas Hydrates and Flow Assurance of Reservoir Fluids Course
Introduction:
Over the course of five days, this comprehensive training program explores various aspects of flow assurance, including gas hydrates, wax, asphaltene, scale, corrosion, and emulsion. Special attention is given to the study of gas hydrates. Each flow assurance issue is thoroughly discussed, covering the nature of the problem, testing techniques, risk assessment, and preventive/remedial options.
The course primarily focuses on the practical aspects of flow assurance. Key topics include PVT (Pressure-Volume-Temperature) phase behavior, extracting relevant data from PVT reports, identifying associated risks, determining necessary complementary tests, evaluating test results, and applying them to real field conditions. Additionally, participants will learn about the parameters that should be monitored throughout the lifespan of the reservoir.
Course Objectives:
- The range of flow assurance challenges and how to evaluate the risk of occurrence.
- Methods for avoiding flow assurance problems and how best to screen and select mitigation and remediation options.
- Find out how to model various scenarios in the production flow line system.
- Discuss and identify appropriate solutions for the range of flow assurance problems that can arise.
Who Should Attend?
Petroleum, production, process, drilling engineers / operators / technicians / managers.
Course Outlines:
- Introduction to flow assurance and its importance in design and operation of oil and gas facilities
- Phase behavior of pure, binary and multi-component systems
- Introduction to PVT report, identifying key data
- Basic PVT, bubble point, dew point, flash calculations and phase envelope
- Calculating the amount of condensed/produced water
Gas Hydrates
- Conditions necessary for their formation
- Hydrate dissociation versus hydrate formation
- Calculating hydrate formation point at a given pressure or temperature
- Hydrate phase boundary for gas and oil systems in the presence of condensed water
- Hydrates in low water content systems, dehydration requirement for avoiding gas hydrates, water dew point and its effect on hydrate stability zone
- Using inhibitor in low water content gases
- Evaluating gas hydrate risks in various scenarios, including drilling, well intervention, cleaning, testing, start-ups, normal operations, shut-downs
- Effect of salt(s) on the hydrate stability zone
- Options available to avoid gas hydrate problems
- Calculating amount of thermodynamic inhibitor required
- Combination of salt and thermodynamic inhibitors
- Calculating inhibitor loss to hydrocarbon phases
- Calculating inhibitor injection rates, effect of inhibitor purity
- Methanol versus glycol
- Calculating inhibitor injection rates, effect of inhibitor purity
- Low Dosage Hydrate Inhibitors (LDHI), advantages and disadvantages
- The required conditions for Anti-Agglomerants (AA) application
- Testing and evaluation of Anti-Agglomerants
- Ideal conditions for application of Kinetics Hydrate Inhibitors (KHIs)
- Conventional and new testing techniques for Kinetic Hydrate Inhibitors
- Addressing challenges associated with KHI application, KHIs and shut-in conditions, KHI in produced water re-injection, KHI in MEG regeneration
- KHI removal, recovery and reuse
- New techniques for improving reliability of hydrate prevention strategies
- Hydrate safety margin monitoring
- Detecting early signs of hydrate formation
- Kinetics of hydrate formation and dissociation
- Hydrate deposition
- Risk of hydrates in CCS (Carbon Capture and Storage) and prevention options
- Under-inhibited systems, transportability of hydrate slurry
- Techniques for removing hydrate blockages, risks involved and how to minimize them
Tutorials, case studies and exercises
Waxes
- Introduction to waxes
- Conditions that could lead to wax formation
- Testing techniques to evaluate the risks associated with wax precipitation and deposition
- Techniques for avoiding and/or mitigating wax problems
Asphaltenes
- Introduction to asphaltenes
- Conditions that could lead to asphaltene formation
- Testing techniques to evaluate the risks associated with asphaltene precipitation and deposition
- Risk of asphaltene in EOR
- Techniques for avoiding and/or mitigating asphaltene problems
Scales
- Introduction to scales, various types of scale
- Risk of scale in water flooding
- Testing techniques to evaluate the risks associated with scale precipitation and deposition
- Risk of halite in gas reservoirs and/or gas storage
- Techniques for avoiding and/or mitigating scale problems
Corrosion
- Introduction to corrosion, various types of corrosion
- Risk of corrosion in oil and gas production
- Testing techniques to evaluate the risks associated with corrosion
- Techniques for avoiding and/or mitigating corrosion problems
Emulsion
- Introduction to emulsions
- Conditions that could lead to emulsion formation
- Techniques for evaluation risk of emulsions
- Options for reducing the problems associated with emulsion