Engineering and Maintenance
Pumps and Compressors, Types, Troubleshooting, Maintenance and Overhauling
Select Other "city & date"
Pumps and Compressors, Types, Troubleshooting, Maintenance and Overhauling Course
Introduction:
Course Objectives:
At the end of this program participants will have:
- Have an understanding of the different types of pumps and compressors.
- Be able to operate pumps and compressors as close as possible to the design efficiency.
- Will be able to monitor pump and compressor efficiency, availability and reliability.
- Have learnt about selection, operation and maintenance strategies.
- Be able to troubleshoot pump and compressor problems.
- Be able to specify, operate and maintain fluid movers and drivers
Who Should Attend?
This program is directed towards
- Supervisors, Team Leaders, and Professionals in Maintenance, Engineering, and Production.
- It is suitable for Professionals who expect to become involved at any stage in project applications and applicable maintenance technologies.
The program will also benefit anyone those wishes to update themselves on pump and compressor technology, judge the suitability of different types of pumps and compressors for their needs, and learn how to operate and maintain them for the benefit of their organizations.
Course Outlines:
Compressors
- Compressor types: positive displacement (reciprocating and rotary), and dynamic (centrifugal and rotary), compressor operation, gas laws
- Compressor performance measurement, inlet conditions, compressor performance, energy available for recovery
- Positive displacement compressors, reciprocating compressors, reciprocating compressors, diaphragm compressors.
- Rotary compressors, rotary screw compressor, lobe type air compressor, sliding vane compressors, liquid ring compressors
- Dynamic compressors, centrifugal compressors, axial compressors
- Air receivers, compressor control, compressor unloading system
- Intercoolers and aftercoolers, filters and air intake screens
Centrifugal & Axial Compressors
- Principle of operation of centrifugal and axial flow compressors, characteristics of centrifugal and axial flow compressor
- Surging, choking, bleed valves, variable stator vanes, inlet guide vanes
Compressor Systems Calculations
- Affinity Laws for centrifugal compressors
- Calculations of air leaks from compressed-air systems, annual cost of air leakage
- Centrifugal compressor power requirement
- Compressor selection, calculations of air system requirements
- Characteristics of reciprocating compressors and blowers
- Selection of air distribution system, water cooling requirements for compressors
- Sizing of compressor system components, sizing of air receiver
- Calculations of receiver pump-up time
Pumps
- Pump definition, pump categories: dynamic and displacement reciprocating & rotary
- Centrifugal pumps: theory of operation of a centrifugal pump, casings and diffusers, radial thrust, hydrostatic pressure tests
- Impeller, axial thrust, axial thrust in multistage pumps, hydraulic balancing devices, balancing drums, balancing disks
- Centrifugal pumps general performance characteristics, cavitations, net positive suction head and requirements
Bearings & Lubrication
- Types of bearings, ball, and roller bearings, stresses during rolling contacts
- Statistical nature of bearing life, materials and finish, sizes of bearings, types of rolling bearings, thrust bearings
- Used oil Analysis: proper lube oil sampling technique, test description and significance, visual and sensory inspections, chemical and physical tests, water content, viscosity, emission spectrographic analysis, infrared analysis, total base number (TBN), total acid number (TAN), particle count, summary
Positive Displacement Pumps
- Reciprocating pumps, piston pumps, plunger pumps, rotary pumps, screw pumps, lobe pump
- Cam pumps, vane pumps, metering pumps
Pump Selection
- Engineering of system requirements, fluid type, system head curves, alternate modes of operation, margins, wear, future system changes
- Selection of pump and driver, pump characteristics, code requirements, fluid characteristics, pump materials, driver type
- Pump specification, specification types, datasheet, codes and standards, bidding documents, technical specification, commercial terms, special considerations, performance testing, pump drivers
- Special control requirements, drawing and data requirements form, quality assurance and quality control, bidding and negotiation
- The public and private sector, bid list, evaluation of bids, cost, efficiency, economic life, spare parts, guarantee/warranty, simple bid evaluation
Mechanical Seals
- Basic components, temperature control, seal lubrication/leakage, typical single inside pusher seal
- Maintenance recommended on centrifugal pumps, recommended pump maintenance
Vibration Analysis & Predictive Maintenance
- Vibration instrumentation, velocity transducer, acceleration transducer, transducer selection, time domain, frequency domain, machinery example, vibration analysis
- Vibration causes, forcing frequency causes, unbalance, misalignment, mechanical looseness, bearing defects, gear defects, oil whirl, blade or vane problems, electric motor defects, uneven loading, drive-shaft torsion
Maintenance of Motors
- Introduction to AC induction motors and their construction, rotor slip and principles of operation, equivalent circuit, torque-speed characteristics, motoring and regenerative region of operation
- Starting of induction motors and associated techniques
- Speed control methods of induction motors
- Characteristics of motors, enclosures and cooling methods, application data, design characteristics, insulation of AC motors
- Failures in three-phase stator windings, predictive maintenance, motor troubleshooting, diagnostic testing for motors
Variable Speed Drives
- Basic principles of AC Variable-Speed Drives (VSD's), constant torque region, constant power (extended speed) region, four-quadrant operation
- Power semiconductors, diode, thyristor (SCR), IGBT, MOSFET, GTO and others
- Inverters, Voltage-source and Current-source, Pulse Width Modulated (PWM) inverters
Variable Speed Drives
- Two-level pulse width modulated inverter, DC link energy and capacitor sizing, regeneration or dynamic slowdown, dynamic breaking, regeneration
- PWM waveforms and analysis, effects of PWM on motor bearings and insulation and life expectancy, Volts/Her